Description
Marabu GRAFIX GONE® is ideal to eliminate adhesive residue left after vinyl is removed without damaging the surface. It can be used on most plastic, latex paint, glass, plexiglass and painted surfaces.
DIRECTIONS FOR USE
- Use heat lamp or heat gun to soften vinyl. Pull the vinyl from the surface.
- Apply GRAFIX GONE with sprayer, cloth or paper towel
- Let sit for at least 90 seconds until glue softens.
- Scrape with squeegee to remove glue residue.
- Wipe area with clean cloth or towel.
- Remove any remaining glue with GRAFIX GONE. Dry surface thoroughly.
USE WITH ADEQUATE VENTILATION. WEAR PROTECTIVE GLOVES.
Can I use Grafix Gone to remove vinyl?
No, Grafix Gone is an adhesive remover. It will remove the adhesive residue left after you remove the vinyl. Anything strong enough to remove the vinyl may be so aggressive it could remove or damage the underlying material.
Will Grafix Gone attack paint?
You must be sure your paint is completely dry. Grafix Gone will not harm most painted surfaces, but always test products prior to use.
Can I use Grafix Gone on plastics?
Yes. Although most adhesive removers cannot be used on polycarbonates such as Lexan, Grafix Gone is safe to use on this and other plastic substrates, even Styrofoam.
