Multi Surface tape Primer 250ml

£21.06 inc VAT £17.55 ex VAT

High Strength Bonding Tape Surface Primer helps bonding tape form an even more powerful bond.

In fact, using the correct primer can increase final bond strength by up to 50%.

The primer is non carcinogenic and specifically formulated for the MS4U range of high strength bonding tapes,

Though you’ll find it’s compatible with most advanced acrylic adhesives.

It works chemically by:

altering the substrate surface,

increasing the surface energy and making it more receptive to adhesive bonding.

You need no specialist equipment to apply it, it’s fast acting and easy to use.

Primer for self adhesive tapes.

SKU: 475 Categories:


High Strength Bonding Tape Surface Primer 250ml.

How to apply Surface Primer


Remove dirt, dust, excessive grease, oils or other contaminants with IPA Surface cleaner following the instructions.


  1. Open the container carefully and release pressure slowly.
  2. Apply Surface Primer to the surface(s) you intend to bond using a clean, dry, lint-free cloth. This should ‘flash off’ (evaporate) in around 10 to 20 seconds.
  3. Dry any over-wet areas and leave the primer to act for 5 minutes prior to bonding..

Safety information:

Occasional skin contact with Surface Primer should have no adverse effect. Avoid prolonged soaking or repeated contact.

Please note:

The above guidance does not constitute a Material Safety Data Sheet (MSDS). For handling, storage, composition and safety information

please ensure you have read and fully understood the Surface Primer MSDS .(available on request)